Instructions for use for the user
p. 16/26
5. Commissioning
5.1. Filling the stone container
The amount of stones suited to your heater can be found in
chapter
Technical data
(see page
25
).
1. Wash the stones thoroughly using water and a brush before use.
Do not use any cleaning additives.
2.
%HIRUH¿OOLQJWKHKHDWHUZLWKWKHVDXQDVWRQHVFKHFNWKHPIRUIRUHLJQREMHFWV
and remove any remaining packaging.
3. Place the stones in the stone container and also between the heating rods.
6WDFNWKHVDXQDVWRQHVORRVHO\VRWKDWDLUFDQÀRZWKURXJKWKHJDSV
4. Do NOT allow the heating rods to make contact with one another
.
5. Make sure that the sauna stones do not protrude beyond the edge of
the stone container.
WARNING!
5LVNRI¿UHGXHWRRYHUKHDWLQJ
If the sauna heater is used without sauna stones, the cabin walls will
EHFRPHH[WUHPHO\KRW7KLVFRXOGFDXVH¿UHV
Ɣ
NEVER operate the sauna heater without the sauna stones.
The stone basket
1
can be mounted at
two different heights.
Position
2
: fewer stones, shorter heating
time, energy saving
Position
3
(set at factory): more stones,
larger amount of water for pouring possible,
creating more steam, longer heating times
1
3
2