Sentinel SMW1000D, Инструкция по эксплуатации, Страница: 20 / 28

19
MODEL:
SMW1800E
Operation Instructions Cont.
1) This mode allows cooking of food items through a one pad touch operation.
While in Ready Mode,pressing one of t digit keys on the keyboard will cause
the oven to run the Preset Program associated with that key.
2) During this mode,
displays the remaining cooking time. If it is multi-stage
cooking. the total remaning cooking time displays not a particular stage cooking time.
) When cooking program finish, the oven will enter End of Cook Cycle Mode.
If you press " " button under this mode, the oven will enter Pause Mode.
buttons, the preset cooking program will start automatically.
9. Preset Program Cook Mode
10. On the Fly Cooking
en
3
the screen
1) While the oven is cooking, if User Option OP:51 is selected,press number
2) The screen displays the remaining cooking time.
3) When cooking program finish, the oven will enter End of Cook Cycle Mode.
1) Through the use of the X2 pad, the user can easily set the time two of a particalar
food item.
1 . Double Quantity cooking
2) If the "X2" button is pressed in ready mode, followed by the starting of a Preset
Program,or if the "X2" button is pressed in 5 seconds of starting a Preset Program,
the oven will start cooking with the quantity preset cooking time.
1
3) Press "X2", "DOUBLE" displays. When press number buttons, the screen will display
For example, number button "5" and its preset time is 1 minute. Then press "X2", then
time will change to 1:00*(1+0.8)=1:48(1 minute and 48 seconds).
4) When cooking program finish, the oven will enter End of Cook Cycle Mode.
Note: This function can be used under
mode. programm preset e
the quantity preset time.
1 . Programming Mode
This mode allows the user to assign cook times and power levels to the once touche button.
1) Open the door and press "1" pad for 5 seconds, the buzzer will sound once and enter to
Programming Mode.
2) "PROGRAM" displays. you can input the time
you need.
Hold 0%", "Defrost 20%", "Medium 50%" or "Med-Hi 70%" to input the power
level. will display the related power. If the same button pressed twice, the the screen
3) Press "
power will change to PL10. If no power chosen, "PL 0" is default. 1
2