2
3
• Never exceed recommended amperage
• Verify power source prior to connecting unit to power source
• Make sure unit is securely mounted
• Do not mount unit near heat generating sources
• This unit shall not be exposed to dripping, splashing or spraying of liquids.
Protect unit from vapors, foggers etc.
• Clean unit with clean dry cloth, no oils or solvents.
• Protect any power cords from being walked on, pinched or crushed.
• Unit is designed for indoor use only
• Unit is to be used within defined environmental parameters
• Use caution when operating in high humidity environments
• This unit contains no user-serviceable parts. Do not attempt to service
this product.
• Verify that all equipment connected to unit is of proper voltage
• Do not put paperclips, tools etc inside unit openings or receptacles.
Possible fire, shock or death may occur.
IMPORTANT: The remote probe contains sensitive electronic componentry.
Protect from spraying, splashing, misting, foggers, sulfur vapors, pesticides,
fungicides, cleaning solutions. Probe assembly should be covered or removed
prior if the possibility of any of these occurring exists. Damage from these
occurrences is NOT covered under warranty.
Protect probe from impacts and jarring.
Any damage to probe will be considered improper usage or user neglect and
void any and all warranties.
IMPORTANT WARNINGS AND CAUTIONS
Read all instructions before installation and usage.
Save these instructions.
GETTING TO KNOW YOUR CPPM-4i
CO2 DEVICE
RECEPTACLE
LED STATUS
DISPLAY
BATTERY COMPARTMENT
REMOTE
SENSOR
CONNECTION
ON/OFF
SWITCH
FUSE HOLDER
COMPARTMENT
TYPE (250V /
5A F3AL250V)
Scan this code to
learn more about
the Sentinel
CPPM-4i on your
smart phone!
SENTINEL
S.I.C.E. CO2
GENERATOR
CONNECTION