Operating Instructions
• When you turn the ignition key to the Accessory or ON position, power is
supplied to the monitor and the monitor is in standby (If the Power button is
not pushed in)
• When you push the power button you can view the picture from the
camera manually. Note: the shutter will only open when the corresponding
channel is selected on the monitor
Shutter operation:
1. It closes when the vehicle is turned off
2. It opens when the camera’s channel is manually selected
3. If the camera is connected to Ch 1, the shutter will automatically open
when the vehicle’s gear is set to reverse (Note: the monitor
automatically turns ON when the gear is in the reverse position).
Care & Maintenance
• If your vehicle has been parked in direct sunlight resulting in a
considerable rise in temperature inside the vehicle, allow the unit to
cool before operating
• Clean the unit with a slightly damp soft cloth.Use a mild household
detergent. Never use strong solvents such as a thinner or benzine as
they might damage the finish of the unit.
-8-
