To maintain maximum efficiency and to prevent bacterial growth, we suggest
you clean your unit regularly, especially the water pipe and water filters.
1. If there is no water flowing down but you can
still hear the compressor and water pump are
working, the water pipe is probably blocked.
To clean it up, turn off the unit first and then
remove it from the unit. Clean each hole on
the pipe wall as shown in the right picture.
After cleaning it up, make sure it’s replaced
correctly and the right end is connected to
the silicone pipe.
2. For both of the water tank and the big water
reservoir, clean them with diluted detergent,
warm water and a soft cloth. Rinse the inside and drain out the water from the draining port
by unplugging the drain cap on the back. It will help you keep the unit and ice-cube clean and
maintain its efficiency.
3. If you find there are ice left in evaporator and cannot be removed easily, press and hold the
power button for more than 5 seconds to activate ice dumping mode. The whole process
might take 1-3 minutes.
How to drain out the water from the internal tank and big water reservoir
completely
To drain out the water from both the big water tank and inner tank, unplug your unit and remove
the cap of the Water Outlet.
7
