www.sentera.eu
MIW-MTV-1-CP-EN-000 - 22 / 08 / 2018
5 - 8
back to the table of contents
STANDARDS
■
Low Voltage Directive 2014/35/EC
■
EMC Directive 2014/30/EC
■
WEEE Directive 2012/19/EU
■
RoHs Directive 2011/65/EU
OPERATIONAL DIAGRAM
MTV-1/010-CP
Analog output
100 %
70 %
Max
Min
Min
Max
Potentiometer position
WIRING AND CONNECTIONS
L, N
Power supply (230 VAC ±10 % / 50 —60 Hz)
CS
Dry contact for remote ON / OFF switching
Out (+ -)
Output voltage (0—10 VDC / 0—20 mA / PWM)
Connections
Cable cross section: max. 1,5 / 2,5 mm
2
MOUNTING INSTRUCTIONS IN STEPS
Before you start mounting your potentiometer, read carefully
“Safety and Precautions”
and follow the steps:
For inset mounting
1.
Remove the knob by turning it to the right until it pops out.
2.
Unscrew the nut to remove the cover of the external enclosure.
3.
Do the wiring according to the wiring diagram (see
Fig. 1
Wiring and connections
).
OFF position
MTV-1-CP
230 VAC POTENTIOMETER WITH MIN
& MAX SETTINGS, DRY CONTACT
