Sentera Controls EVSS Series, Монтаж и эксплуатация

Страница: 5 / 16

www.sentera.eu
MIW-EVSS-DM-EN-000 - 18 / 12 / 2018 5 - 16
back to the table of contents
■
Motor overheating indication
■
Enclosure: plastic R-ABS, UL94-V0; grey colour (RAL 7035)
■
Protection standard: IP54 (according to EN 60529)
■
Operating ambient conditions:
► temperature: -20—40 °C
► rel. humidity: < 95 % rH (non-condensing)
■
Storage temperature: -40—50 °C
STANDARDS
■
Low Voltage Directive 2006/95/EC
■
EMC Directive 2004/108/EC: EN 61326
■
WEEE Directive 2012/19/EU
■
RoHs Directive 2011/65/EU
WIRING AND CONNECTIONS
L Supply voltage 230 VAC ±10 % / 50—60 Hz
N Neutral
PE Earth terminal
L1 Unregulated output (230 VAC / max. 2 A)
U1, U2 Regulated output to the motor
TK, TK Thermal contact
N Neutral
AL Alarm output (230 VAC / 1 A)
SW Remote control switch
A Modbus RTU (RS485) signal A
/B Modbus RTU (RS485) signal /B
+V Supply 12 VDC / 1 mA
Ai
Analog input (0—10 VDC / 0—20 mA) or
(10—0 VDC / 20—0 mA)
GND Ground
Connections
Cable cross section: max. 2,5 mm
2
Cable gland clamping range: 3—6 mm / 5—10 mm
EVSS
ELECTRONIC FAN SPEED
CONTROLLER WITH TK