ST815 Stable Laser Source
4
ST815B, ST815C, ST815D Figure
1. 1310nm, 1550nm output adapter
2. The second output adapter:
ST815B: 1490nm output adapter
ST815C: 850nm, 1300nm output adapter
ST815D: 1625nm output adapter
3. LCD
4. Operate button
5. Charging socket
ST815 Stable Laser Source
5
5. Operation
1.
On/Off
Press "On" key 2 seconds to start the equipment,
LCD displays operating wavelength, battery
voltage and modulation state. When you open the
ST815, it works on 1310 nm wavelength and
continuous light output state; press "off" key 2
seconds to close the equipment. The system
defaults auto-shutdown, auto shutdown logo
is
displayed on the screen. Open and turn off the
automatic shutdown function: Press "off" button on
the screen, auto-off mark
disappear, which
shows the automatic shutdown function is closed;
and then press "off" button, automatic shutdown
logo
is displayed on the screen at this time
has indicated that the automatic shutdown feature
open. If there is no operation for 10 minutes, the
equipment will automatically shutdown.
2.
2.
2.
2.
Wavelength switch function
Press "wavelength" button, you can switch
different wavelengths, and LCD screen display the
different output wavelength.
Note: If you want to switch the 1310nm,
1550nm
wavelength
to
850nm,
1300nm
(ST815C) or 1490nm (ST815B) or 1625nm
(ST815D), do not forget to change the output
adapter.
3.
Modulation output
Press the "Mode" button, you can achieve the
modulated light 270Hz, 1 kHz, 2 kHz continuous
light output, at the same time on the LCD screen
will show the corresponding modulation frequency
of the state.
12-1015
12-1015
