SenTech STC-MBS322U3V Скачать руководство пользователя страница 58

Страница: 58 / 65

No.15S103-01

58/65

STC-MBS510U3V / STC-MCS510U3V / STC-MBS322U3V / STC-MCS322U3V

Specifications and Use

’s guide

7.17 GenICam command list

Name

Description

DeviceType

Returns the device type.

DeviceScanType

Scan type of the sensor of the device.

DeviceVendorName

Name of the manufacturer of the device.

DeviceModelName

Model of the device.

DeviceFamilyName

Identifier of the product family of the device.

DeviceManufacturerInfo

Manufacturer information about the device.

DeviceVersion

Version of the device.

DeviceFirmwareVersion

Version of the firmware in the device.

DeviceSerialNumber

Device's serial number. This string is a unique identifier of the device.

DeviceUserID

User-programmable device identifier.

DeviceSFNCVersionMajor

Major version of the Standard Features Naming Convention that was used to create the

device`s GenICam XML.

DeviceSFNCVersionMinor

Minor version of the Standard Features Naming Convention that was used to create the

device`s GenICam XML.

DeviceSFNCVersionSubMinor

Sub minor version of Standard Features Naming Convention that was used to create the

device`s GenICam XML.

DeviceManifestEntrySelector

Selects the manifest entry to reference.

DeviceManifestXMLMajorVersion

Indicates the major version number of the GenICam XML file of the selected manifest entry.

DeviceManifestXMLMinorVersion

Indicates the minor version number of the GenICam XML file of the selected manifest entry.

DeviceManifestXMLSubMinorVersio

Indicates the subminor version number of the GenICam XML file of the selected manifest

entry.

DeviceManifestSchemaMajorVersio

Indicates the major version number of the schema file of the selected manifest entry.

DeviceManifestSchemaMinorVersio

Indicates the minor version number of the schema file of the selected manifest entry.

DeviceTLType

Transport Layer type of the device.

DeviceTLVersionMajor

Major version of the Transport Layer of the device.

DeviceTLVersionMinor

Minor version of the Transport Layer of the device.

DeviceTLVersionSubMinor

Sub minor version of the Transport Layer of the device.

DeviceGenCPVersionMajor

Major version of the GenCP protocol supported by the device.

DeviceGenCPVersionMinor

Minor version of the GenCP protocol supported by the device.

DeviceMaxThroughput

Maximum bandwidth of the data that can be streamed out of the device. This can be used to

estimate if the connection can sustain transfer of free-running images from the camera at its

maximum speed.

DeviceLinkSelector

Selects which Link of the device to control.

DeviceLinkThroughputLimitMode

Controls if the DeviceLinkThroughputLimit is active. When disabled, lower level TL specific

features are expected to control the throughput. When enabled, DeviceLinkThroughputLimit

controls the overall throughput.

DeviceLinkThroughputLimit

Limits the maximum bandwidth of the data that will be streamed out by the device on the

selected Link. If necessary, delays will be uniformly inserted between transport layer packets

in order to control the peak bandwidth.

DeviceLinkCommandTimeout

Indicates the command timeout of the specified Link. This corresponds to the maximum

response time of the device for a command sent on that link.

DeviceCharacterSet

Character set used by the strings of the device`s bootstrap registers.

DeviceReset

Resets the device to its power up state.

DeviceRegistersStreamingStart

Prepare the device for registers streaming without checking for consistency.

Содержание STC-MBS322U3V


































































Результаты поиска

Содержание STC-MBS322U3V

Отзывы:

Похожие инструкции для STC-MBS322U3V

Бренды по названию

Популярные бренды

SenTech STC-MBS322U3V, Технические характеристики

Результаты поиска

Содержание STC-MBS322U3V

Отзывы:

Похожие инструкции для STC-MBS322U3V

Бренды по названию

Популярные бренды