SenTech STC-C42A, Руководство по применению

Страница: 12 / 18

STC-C42A/C43A
Command
No.
Read / Write
Save to
EEPROM
Function
Initial
Data
Data
Range
60H Read / Write X
Control selection (Rear panel / communication) 98bit: D[7…0])
0 -
61H Read / Write X
DAC reference voltage (8bit: D[7…0])
The value of
0DH address
-
62H Read / Write X Fixed gain value for the rear pa
nel (8bit: D[7…0])
16 0 to 255
63 to 64H Read / Write X
Maximum setting of the pot on the rear panel (16bit: D[15…0])
422
0 to
65535
65 to 6FH Reserved (Please to do not use these) - -
70 to 71H Read The current selection on the rear panel (1 bit: D[15]) - -
72H Read
The current gain value 98bit: D[7…0])
- -
73 to 75H Reserved (Please do not use these) - -
76 to 77H Read
Status of the DIP switch on the rear panel (10bit: D[9…0])
- -
78 to 7DH Reserved (Please do not use these) - -
7EH Read / Write X
Firmware version verification (16bit: D[15…8])
D[15…12]: The integer, D[11…8]: 1
st
place of the decimal
The value of
02H address
-
7FH Read / Write X
Firmware version verification (16bit: D[7…0])
D[7…4]: 2
nd place of the decimal, D[3…0]: 3 rd
place of the decimal
The value of
03H address
-
80H Read / Write
EEPROM control (8bit: D[7…0])
0 0 to 3
81 to FFH Reserved (Please do not use these) - -
Application Manual 9 of 13 Rev1.0