MULTISENS User Manual
5
MultiSens User Guide EN_v1.0_281218
2
Activation
2.1.
Turn On
Press and hold down the KEY button( ) and the device will be switched on along with the three seconds
countdown.
(The device will be switched on only when you keep pressing the button for longer than three seconds.)
Once activated, the device will enter the warm up stage to stablize sensors. The warm up process is completed,
the device is ready to detect gases.
2.2. Turn Off
Keep pressing the KEY button( ) and the 3, 2 and 1 in the mentioned order will appear on the monitor and
finally the device will be switched off.
(The device will not be switched off only unless you keep pressing the button for longer than three seconds.)
<Caution> A proper calibration is always required before using the device at the work site. The user shall
check whether the device is properly sensing the levels of dangers of gases and make sure whether the
detecting section of the device is not blocked with materials impairing the detection.
Initial Setting Mode
Gas Measuring Mode
