Sensors & Software CONQUEST 100, Руководство пользователя, Страница: 51 / 143

Conquest 100 Tools & Setup
41
Figure 5-5: Using Gmail as e-mail provider
•
Press Username to display a keyboard where you can enter your GMAIL user name
only; you do not need to enter @gmail.com. Then press OK when done (Figure 5-6)
•
Press Password to display a keyboard where you can enter your GMAIL password.
Then press OK when done (Figure 5-6).
•
Press Save when both Username and Password have been entered.
Figure 5-6: Entering e-mail address and password
If there are no warning messages, the e-mail address is setup properly and you are ready to e-
mail mini-reports from the field. If this does not work, see the
Failed Setup section below.
Using Another Provider
Note: It is highly recommended to use a GMAIL account as the system is pre-configured
for this. If you choose to use another provider, you will have to contact that provider if
you have any issues with the settings.