background image

QUICK GUIDE

3. Turn on the radar detector

 

1. Move the POWER switch to ON.

 

2. The screen will display ”SENSORO RADAR DETECTOR * * * FILTER-NORMAL” indicating a 

 

  normal filter mode.

 

3. The screen will then display a random compass direction if the compass has not been 

 

  set-up since purchase.

  If  you  selected  an  alternate  alert  filter  mode  during  previous  use,  it  will 

 

display either “FILTER-HIGH” or “FILTER-OFF” instead of “FILTER-NORMAL” per 

 

your selection. 

4. Setting up the compass

 

1. To set the compass readings you will need to drive your vehicle slowly in a full circle. 

 

  Be sure you are in an area where you can safely perform this maneuver.

 

2.  Install  the  radar  detector  in  your  vehicle  at  your  preferred  location  -  windshield, 

 

  dashboard, or visor.

 

3. Press and hold the BACKLIGHT and MUTE buttons simultaneously for 3 seconds.

 

4. The screen will display “DRIVE IN A FULL CIRCLE... PRESS ANY BUTTON WHEN DONE.” 

 

5. Drive your vehicle in a full circle. The direction and size of circle do not matter. You 

 

  have one minute to complete the maneuver.

 

6. Press any button to complete the compass set-up.

 

3

Содержание SILVER BULLET RX7600







Отзывы: