Sensorex UVT-LED-PW, Быстрый старт

Страница: 4 / 4

1.
2.
3.
1. UVT-LED-PW sensor
2. 1.5” Sanitary clamp
3. 1.5”Sanitary gasket
4. 2“ PVC adapter
5. 2” NPT PVC SCH 80 TEE
6. 2“ x 1/2” PVC reducer
7. 1/2“ x 1/4” reducer
8. 1/4” NPT to barb quick
disconnect fitting
4.
5.
6.
7. 8.
STEP 3 – INSTALLING THE UVT-LED (CONTINUED)
D) 2” PVC Installation Kit (UVT0023)
Install 2” x 1⁄2” PVC reducer (#6) 2 each onto 2” NPT PVC SCH80 threaded tee (#5). Install 1⁄2” x 1⁄4”
PVC reducer x2 (#7) onto #6. Install Quick disconnect fitting (#8), 2 each onto #7. Connect 1⁄4” tubing
to #8. Install 2”NPT x 1.5” sanitary flange adapter (#4) onto top of #5. Insert 1.5” sanitary gasket into
groove on top of #4. Install UVT-LED-PW sensor (#1) into #4 with #3. Attach provided 1.5” sanitary
clamp (#2) around flange of #4 and flange of #1. Tighten clamp to seal sensor using wing nut on #2.
C) 3” Sanitary tee kit (UVT0015) and 2” Sanitary tee kit (UVT0024)
Place the flange caps on each end of the sanitary tee using the sanitary gaskets, and secure using the
sanitary clamps. Place the 1.5” sanitary gasket into the top groove of the sanitary tee. Place the mea-
surement area of the UVT-LED into the sanitary flange, and clamp in place using the tri-clamp fitting.
Tighten the wing nut of the tri-clamp fitting to ensure no leaking occurs. Install a ¾” compression
fitting and tubing into each of the flange caps.
Parts covered by this product data sheet include: UVT-LED-PW
Document Number 480433 / Rev: 2016-11-18
© 2016 Sensorex Corporation
1.
2.
1. UVT-LED-PW sensor
2. 1.5” Sanitary clamp
3. 1.5”Sanitary gasket
4. Sanitary tee (3“(UVT0015),
2”(UVT0024))
5. Sanitary gasket x2 (3“(UVT0015),
2”(UVT0024))
6. Flange cap x2 (3“(UVT0015),
2”(UVT0024))
7. Sanitary clamp x2 (3“(UVT0015),
2”(UVT0024))
8. 1/4” NPT Barbed fitting x2
3.
4.
5.
6.
7.
6.
8.
1) UVT-LED-PW sensor
2) 1.5” Sanitary clamp
3) 1.5” Sanitary gasket
4) Sanitary tee (3” (UVT0015),
2” (UVT0024))
5) Sanitary gasket x2 (3” (UVT0015),
2” (UVT0024))
6) Flange cap x2 (3” (UVT0015),
2” (UVT0024))
7) Sanitary clamp x2 (3” (UVT0015),
2” (UVT0024))
8) 1/4” NPT Barbed fitting x2
1) UVT-LED-PW sensor
2) 1.5” Sanitary clamp
3) 1.5” Sanitary gasket
4) 2” PVC adapter
5) 2” NPT PVC SCH 80 TEE
6) 2” x 1/2” PVC reducer
7) 1/2” x 1/4” reducer
8) 1/4” NPT to barb quick discon-
nect fitting