1/4 TURN AND
PULL TO REMOVE
Cable Considerations
To install the cable in conduit, a threaded cable cap assembly
should be used (S653). Before the main rigid conduit a length
of flexible conduit (at least 6"longer than the insertion rod
should be used so that the insertion rod can completely clear
the adapter body (large body with 1" NPT that threads into ball
valve) for removal or the electrode.
Part number
Minimum Length Flexible Conduit
S675
24"(61cm)
S676
30"
(76cm)
S677
36"
(91cm)
FIG. 9
FIG. 10
BALL
VALVE
CLOSED
STEEL WASHER
O-RING
FACE SEAL
ELECTRODE
WHITE
RETAINER NU
T
CAUTIONS:
1) DO NOT INSERT INSERTION ROD ASSEM-
BLY INTO SOLUTION WITHOUT ELECTRODE
ATTACHED!!!
2) MAKE SURE ELECTRODE IS ORIENTED AS
SHOWN IN FIG 4. OR WITH GLASS POINTED
DOWNWARD WHEN INSTALLING OR RE-
MOVING SO THAT LIQUID CANNOT FLOW
BACK INTO THE INTERNAL CONNECTOR!
Insertion/Wet-Tap pH and ORP Assembly (No ATC)
Product Instructions
PRODUCT INSTRUCTION SHEET
Page 3 of 3
Parts covered by this product data sheet include:
S675, S676, S677
Form: InstallInsert [Rev: 2012-05-16]
©2011 Sensorex Corporation
