Infrared Temperature Switch (Hot Metal Detector) Polaris PS09 / PI16
Safety
5
2
Safety
2.1
General
Any person who is tasked to carry out work with the device must have read and understood the operat-
ing instructions before beginning. Operation and maintenance of the system may only be performed by
trained personnel.
2.2
Electrical Connection
When connecting or when working on the mains voltage, the general safety guidelines are observed,
e.g. when connecting power transformers. Supply voltage can be lethal when touching. Improper instal-
lation can cause serious injury or physical damage. Only qualified personnel are allowed to work with
mains voltage.
2.3
Laser Targeting Light
For easy alignment, the devices are equipped with a
laser targeting light,
Laser Class 2 (according to
IEC 60825-1-3-4) and has a sticker shown on the right. The laser emits a visible red light with a maxi-
mum power of < 1 mW and a wavelength around 650 nm.
Safety precautions:
Never look into the direct or reflected laser beam.
Do not point the laser to anyone.
If laser radiation hits the eye, the eyes must be intentional-
ly closed and the head immediately moved out of the
beam.
2.4
Device Labels
A nameplate and a laser targeting light warning label is to find on the Polaris housing.
The device must be mounted in a manner that the labels after installation are still clearly visible.
Keep the warning signs in always legible condition
Replace damaged labels
2.5
Responsibility of the Operators
If the device is used in the commercial sector the operator is subject to the legal responsibilities for
workplace safety.
In addition to the safety instructions in this manual follow the regulations of safety, accident prevention
and environmental protection.
Laser
beam
direction
Laser warning label
on top of the device
