Lantronix Xport Guide IC2001/4001 Controllers
www.sensoraccess.co.uk
+44 (0) 1273 242 355
Telnet Configuration
Clicking onto the Telnet Configuration tab will load this screen
The important aspects to check here are:
The IP address
Port Number
Both of these can be found on the “Device Details” Tab. The Telnet port number if not changed will always be
at default 9999.
Once these are found to be correct click “Connect”
Once connect has been clicked you will see this page
You now have approximately 10 seconds to press enter for the Telnet Setup mode.
If you fail to respond within the timeout, you will need to click connect again.
Once enter has been pressed you will see the settings of the Xport in text form.
