manualshive.com logo in svg

Sensopart FT 50 C S1 Series, Монтаж и эксплуатация, Страница: 4 / 30

Поделиться
Скачать
Sensopart FT 50 C S1 Series Скачать руководство пользователя страница 4

FT 50 C...S1 Colour sensor - GB - 068-13821 - 25.07.2007-01

Mounting and  
operating instructions

35

1 

Guide to symbols

Warnings and other information are signalled by symbols in this manual. They are accompanied by hea-
dings. The following symbols are used:

WARNING

... indicates a possibly dangerous situation which can cause death or serious injury if not avoided.

CAUTION

... indicates a possibly dangerous situation which can cause material damage if not avoided.

INFORMATION

Useful tips and recommendations as well as information for efficient use of the sensor. 

2 

Safety instructions

In order to avoid accidents, injuries or material damage, act with caution and always observe the following 
safety instructions: 

WARNING

The FT 50 C...S1 must never be used to protect the safety of individuals or technical applicati-
ons.

All the safety and handling instructions indicated in these mounting and operating instructions 
must be observed.

The valid on-site accident prevention regulations and general safety regulations must be 
observed.

Read these mounting and operating instructions carefully before using the sensor. 

The manual is a product component and must be kept in immediate proximity of the sensor and 
accessible to personnel at all times.

Connection, mounting and configuration of the sensor is to be carried out by trained personnel 
only.

It is forbidden to tamper with or alter the device in any way!

Содержание FT 50 C S1 Series































Отзывы:

Нет отзывов