Senso AK30, Инструкция по эксплуатации

Страница: 4 / 31

Manual ver 2.0 4
1. INTRODUCTION
This instructions manual describes the installation and operation
of the universal process indicators AK30 and AK32 models.
Read the instructions manual before starting the
unit.
1.1. General specifications
The AK30 is a universal indicator with a configurable input. The
AK32 is a universal indicator with two inputs for the simultaneous
measurement of 2 variables, one configurable and the other for pressure
transducer reading.
Standard:
š
Totally configurable input for thermocouple, thermoresistance,
voltage, current loop, pressure reading or extensiometric gauge (only
AK30)
š
5 digit display (AK30) or double 5-digit display(AK32).
š 2 fully configurable alarms.
Optional:
š Modbus RS-485 communications module.
š Analogue output proportional to the reading on the indicator
š 24 V DC power supply for transmitter
Other:
š
Format: 1/8 DIN43700 (96 x 48 mm, horizontal). Extractable from the
front.
š
Power supply. 85..265 V AC 50/60 Hz (optionally 21..53 V AC / V DC)
š
Dimensions: 96 x 48 x 98 mm
š
Panel drill holes: 91,5 x 45,5 ( ±0,5 )
š Display:
AK30:
5 digits 13 mm for the process variable.