Sensitron S2398CO, Инструкция по эксплуатации

Страница: 22 / 24

ENGLISH
Pag. 18
9. Accessories
Table 3) Table of available accessories that can be purchased separately. Please contact Sensitron for further information.
Part number Description
STS/CKD+ Enhanced calibration keypad with 7-digit display
STS/CLD-OLED Enhanced calibration keypad with OLED display
ZMCAP/123 Alumnium adapter, it allows the correct gas flow to detector’ sensor
head
10. Instructions for disposal
When the device reaches the end of its life, it should be disposed of in accordance with local
waste management requirements and environmental legislation.
Employed materials are subdivided into the following categories:
³
Detector enclosure: Plastic
³
Sensor head enclosure: stainless steel
³
Base board: Waste Electrical & Electronic Equipment (WEEE)
³
Sensing element: Waste Electrical & Electronic Equipment (WEEE)
Sensitron has a policy of continuous development and improvement of its products. As such the specification
for the device outlined in this document may be changed without notice. In case of modification of the prod-
uct, Sensitron disclaims all liability. Data may change, as well as legislation and you are strongly advised to ob-
tain copies of the most recently issued regulations, standards and guidelines. This publication is not intended
to form the basis of a contract. No part of this publication may be reproduced, distributed, or transmitted in any
form or by any means, including photocopying, recording, or other electronic or mechanical methods, without
the prior written permission of Sensitron.