Getting started with the Sensirion ControlCenter Software
• Run the ControlCenter Software.
• The sensor will be identified by the software automatically.
•
1
Select Config to adjust sampling rates, temperature compensation mode
and displayed units.
•
2
Select Plot Settings to adjust the graph configurations.
• Press Start to run a measurement.
02
Set-up
• Install the last version of the Sensirion ControlCenter Software from the website.
• Connect the Sensor-PCB to the flow channel.
• Connect the sensor to a PC via the SEK-SensorBridge. The cable to connect
the sensor with the SEK-SensorBridge is included in the evaluation kit.
01
Please find all information about our differential pressure evaluation kits,
including the required software, on our website:
1
2
