SensioHome 3KW Plastic Kettle, Инструкция пользователя

Страница: 11 / 16

9
WARNINGS
Always remove the kettle from the base before filling it.
Do not fill through the spout.
Do not fill the Kettle above the MAX mark, or below the MIN mark on
the water level indicator.
Never open the lid during boiling.
Filling the Kettle
1. Remove the kettle from the power base.
2. Open the lid.
3. Fill the kettle between the MIN and MAX markings on the water level indicator
with cold water.
4. Replace the lid and place the kettle back on the power base.
Make sure the lid is securely locked before boiling
Switching On
1. Position the kettle on the power base.
2. Plug in and switch the kettle on at the mains.
3. To start boiling the kettle, press the On/Off switch down to the “I” (On) position.
Switching Off
When the water has boiled the kettle will switch off automatically. You can stop the
boiling process at any time by lifting the On/Off switch to the ‘O’ (Off) position.