This mirror is suitable
for installation in zone
1 and zone 2 and the
outside zones.
ZONE
0
Inside the bath or
shower. Must be SELV
(12V max) due to water
submersion.
225cm above the bath
or shower.
1
The area stretching to
60cm outside the bath
or shower and 60cm
from water outlet
of sink.
2
Technical drawings are for illustration purposes only.
Make sure you check all hole cut outs before work commences.
INSTALLATION
When unwrapped lay
the product on a soft flat
surface/cloth with mirror
facing downwards to avoid
scratching the mirror.
Mark the position of the
fixing holes in the metal
bracket onto the wall using
a stud detector to ensure
you avoid any wiring or
water pipes.
Mark the desired height of
the mirror. Drill the required
holes and insert the wall
plugs. Note: Wall plugs
supplied are only suitable
for solid/brick walls. Please
ensure the screws are fully
tight. The mirror can be
mounted either portrait
or landscape.
1
2
3
Hang the mirror onto the brick wall.
Waste Electrical & Electronic Equipment (WEEE)
The symbol on the product, or on the document accompanying the product, the crossed
out wheelie bin symbol, indicates that this product may not be treated as household waste.
Instead it shall be handed over to the applicable collection point for the recycling of
electrical and electronic waste.
