2
3
1
1
2
3
4
5
90 - 92mm
25mm
25mm
Press
to release
Installation
Cut out 90 - 92mm diameter hole in work
surface. Allow minimum 25mm clearance
around the cut hole. When choosing location,
select a surface between 10mm and 50mm thick.
ATTEnTIOn: Ensure there is sufficient space
under the installation surface, for the unit
when it retracts to the closed position.
To use the Pop-up Socket, gently lift up the
silver handle on the top cover until all socket
outlets are exposed and the green stop/release
button clicks and locks the unit in place.
The locking ring with rubber washer is
supplied in the packaging. If attached to the
mounting collar, remove it by rotating it in
an anti-clockwise direction prior to lowering
the unit into its final location.
Press the master switch on. A green light
confirms that power is available. You can use
all power sockets. The unit can be retracted
in position by pressing the green stop/release
button and push the unit down until it’s flush with
the surface. And leaving the engaged cables on
the window of the top cover.
Insert socket into the hole.
Insert Powerpod into the hole to discreetly hide
away when not in use.
• Ensure that the power is disconnected prior to cleaning.
• To keep the finish of this product, wipe over with soft cloth periodically.
• Clean the socket with a damp cloth and mild detergent, dry immediately.
• Do not use harsh chemical solvents, it may dis-colour or damage the finish.
• Never force the Powerpod up or push down - always check there are no obstructions that could interfere during retraction.
Maintenance & Care
Operation
PowerPod
PoP-uP socket
Place locking ring into collar. Identify and align
arrows on the collar and locking ring to ensure
the thread is engaged properly. Turn the locking
ring clockwise to tighten. Make sure rubber
washer is compressed tightly on underside of
surface. Tighten the screw until ring firmly grips
the surface.
Connect cable to power supply, once work has
been completed correctly, the product is now
ready to use.
Sensio House, Unit 6, Lister Park, Green Lane, Featherstone, Pontefract, WF7 6FE
www.sensio.co.uk
* Technical drawings for illustration purposes only.
