Sensio Home Sensio Spa SSPA06, Инструкция по эксплуатации

Страница: 9 / 15

6
Preparations before use
Check that the control switch is in the OFF or “0” position before you
plug the unit into the power.
Do not connect or disconnect the unit to/from the mains when your feet
are in the water or when your hands are wet.
Place the appliance on a flat and suitable surface.
Ensure the unit is NOT plugged in until you have filled with water of
your desired temperature.
DO NOT
fill with water over the “MAX” water line level marked on
the foot spa. Sitting comfortably, select the desired setting - choose
from
1.
“ ” Bubble function, heat and massage from the
massage nubs and infrared heat lamp.
2.
“ ” Bubble function and heat from the massage nubs.
3.
“ ” Massage from the massage nubs and infrared heat lamp.
This function can be used without water in the bath.
4.
“0” OFF
Directions for Use
This foot spa is for household use only. Any commercial use is not
permissible.
Clean your feet before use as deposits of dirt can clog the air jets and
affect the bubble function efficiency
• Do not use the foot spa for more than 15–20 minutes at a time.
• Switch off and unplug the foot spa when it is not in use.
• The foot spa must only be used with water, no other liquids may be
used.
• Do not add bubble bath or bath salt to the water.