Sensica sensilight mini, Руководство пользователя

Страница: 16 / 32

14
Preliminary test
The preliminary test is intended to
determine your skins reaction to the
sensiLight™ Mini treatment and help you set
the optimal energy level for each treatment
area.
Do a preliminary test on each area you
intend to treat 48 hours prior to the full
treatment.
Note:
Do not treat full areas with energy levels
that you have not tested before!
Do not treat the tested area for at least 48
hours after the preliminary test is done.
1. Select the lowest level and deliver a pulse
on the selected preliminary test skin area.
2. If you feel comfortable with the energy
level, increase it to level 2 and perform an
additional pulse on the next spot.
3. Only if you feel comfortable, you may
reach the maximum energy level of 3.
4. Stop the test once you do not feel
comfortable, as increasing the energy
level increases the risk of adverse effects.
5. If you see adverse effects such as severe
redness or blistering - stop the test
immediately.
6. Wait 48 hours and examine the tested
area.
If the skin in the test area seems normal (no
response or mild redness observed), you can
proceed with a full treatment in the highest
comfortable energy level that you tested.
If you see extreme redness, swelling, or
blistering even in the low-energy level
settings, do not do the full treatment in that
area.
How to use sensiLight™ Mini device
Note:
A preliminary test should be conducted
before proceeding to a full treatment. See
“preliminary test section” above.
1. To turn the sensiLight™ Mini device on,
press the ON/OFF button. Energy level 1
green indicator will light on.
2. The device sets itself on the lowest energy
level—level 1. For other energy levels
press the energy level selection button.
3. You may decrease or increase the energy
level according to your convenience
(to reach the level determined in the