Sensei Cut-to-Size LCD Screen Protector, Быстрый старт, Страница: 2 / 3

Thank you for choosing Sensei .
Congratulations on the purchase of your Sensei
Cut-to-Fit LCD Screen Protector Kit. This cut-to-fit
screen protector is designed to protect your device’s
LCD screen from scratches, dust, and smears. It’s
easy to apply and remove, it adheres to the LCD
screen without leaving behind any sticky residue,
and the paper backing includes printed grid lines to
help you custom-fit the screen protector to the
exact size you need.
Please read these instructions carefully before
applying your Sensei Cut-to-Fit LCD Screen
Protector.
Instructions
Before applying your Cut-to-Size LCD
Screen Protector, you must determine the size of
your camera’s LCD screen.
1. Measure the height
and width your device’s
LCD screen
in millimeters.
2. Using a pair of
scissors or a razor and
a straight edge, trim
the screen protector
along the guidelines
that correspond to
your camera’s LCD size.
3. Remove all films or
other intervening
substances from your
camera’s LCD.
4. Clean the LCD with
the included wet wipe,
and then wipe it dry
with the dry wipe. Be
sure to remove all dust
and fingerprints.
5. Partially peel off the
backing from the
screen protector. Be
careful not to get any
fingerprints on the
exposed side of the
screen protector.
6. Make sure your
camera is on a stable
surface, and align the
screen protector with
the camera’s LCD.
Tip: Turning on the LCD
will make it easier to
see the edges when
aligning the screen
protector.
7. Hold the backing of
the screen protector up
while gently pushing
down on the screen
protector with the
included applicator
card. As you push the
applicator card along
the camera’s LCD to
apply the screen
protector, the backing
will gradually peel off.
8. Use the applicator
card to smooth out any
remaining air bubbles
by pushing them to the
edge of the screen
protector.
1
2
3
4
5
6
7
8