Document
UMA 149
Rev
6
Page
2 (8)
FUNCTIONAL DESCRIPTION
This part describes the function of the standard configuration of aSENSE RL. It may
be re-programmed before or after the installation by a PC and the standard UIP
software (version 5 or higher).
Out(1) = measuring signal of carbon dioxide concentration lowest value - highest
value
Out(2) = measuring signal of temperature lowest value - highest value
Out(3) = ON/OFF signal of demand of air quality
The opening of the relay is controlled by the hysteresis of the relay. See figure 4.
Figure 2 The measuring signal of carbon dioxide.
Figure 3
The measuring signal of temperature
Figure 4 The relay output
