Custom Earphone
Insertion Instructions
STEP 1
Hold earpiece with
red or blue dot on top.
Blue = left, red = right.
The cables should run
over and behind your ears.
STEP 2
Place canal portion of
the earpiece into your
ear canal.
STEP 3
Rotate the earpiece
toward the back of your
head as you push the
earpiece in.
STEP 4
Make sure top portion
of earpiece is tucked in.
If the earpiece is not all
the way in, you will not
have a good seal and may
lose bass response. See
Step 5 photo for correct
placement.
STEP 5
Once in the ear, don’t be
afraid to push on the canal
portion of the earpiece to
make sure it is all the way
in. You may need to pull
back on your ear while
pushing it in.
STEP 6
Cables can be adjusted to
fit close to your head by
moving the split adjuster
(zipper) up or down.
To confirm that you have
a good, full seal, go to
www.sensaphonics.com/test
and download our audio
seal test.
REMOVAL
Never pull on the cable to remove earpieces! Instead,
reach behind the earpiece at the bowl of the ear and
twist the earpiece toward your nose as you remove it.
Simple!
With a little practice, inserting your
Sensaphonics earpieces will become quick
and easy. Just follow these simple steps.
