Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one
of the following measures:
●
Reorient or relocate the receiving antenna.
●
Increase the separation between the equipment and receiver.
●
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
●
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution
: To assure continued compliance, any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate this equipment. (Example use only shielded interface cables when
connecting to computer or peripheral devices).
WARNING
EXPLANATION OF GRAPHICAL SYMBOLS
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to th presence of uninsulated dangerous voltage
within the products enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to humans.
The exclamation point, within an equilateral triangle, is intended to alert the
user to the presence of important operating and maintenance(servicing)
instructions in the literature accompanying the appliance.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
:To reduce the risk of electric shock, do not remove the cover, No user serviceable parts inside. Refer servicing to
qualified personnel.
WARNING
:To prevent fire or electric shock, do not expose this equipment to rain or moisture.
Table Of Contents
Introduction
Thank you for choosing Multipurpose Wireless Portable PA Amplifier System In order ro perform at its
best, before operating the unit, please read this manual thoroughly, and retain it for future reference.
Please save this manual. The unit has an elegant design, with a rugged and durable case, reliable
performance, water resistance with fiber material, unusual PCB device, clear and powerful sound. It
is simple to operate. The unit is suitable for both indoor and outdoor use with duration of 6-8 hours,
depending on the volume size.
1.Charging time for the unit varies between 6-8 hours.
2.Wheels can fitted for effortless moving around.
Multipurpose Wireless Portable PA Amplifier System
Identifying The Parts
A / Wireless Receiver Module
B / Volume, Tone Quality and Mater Control Panel
C / Power Descriptions
T / Tape Location of Controls
USB-mp3 Disk
D / CD-mp3 Location of Controls
CD-mp3 / USB Player Location of Controls
Digital mp3 Recorder & Player Location of Controls
Transmitters
Handheld Microphones
Body Pack Microphone
Instruction for Changing Battery
Note on Unit Installation
Troubleshooting and Maintenance Guide
Specifications
1
2
3
3
4
4
5
6
7
9
9
9
11
12
12
12
