Minnow Logger
Quick Reference Guide
Senonics LLC
www.senonics.com [email protected] [email protected]
Revision 1.0.6
Senonics LLC
©
2/6
Then remove the circuit board from the box (use soft tool or fingernail to remove)
Insert a new battery as shown being careful not to touch and exposed electronics in the process.
Finally re-attach the cover and tighten the fastener screws again (be careful not to over tighten).
Connecting to a Minnow Logger
To configure or retrieve data from a logger you will need a Windows PC running Windows XP, Windows
Vista, Windows 7 or Windows 8. Alternatively, you can also install the application on a Mac. Connect the
Minnow logger to your PC using the provided USB cable. Any USB port on the PC can be used.