Minnow 2.0TD & Minnow 2.0THD
User Guide
Senonics LLC www.senonics.com [email protected] [email protected]
Revision 1.0.3
Senonics LLC ©
4/11
3.
USING MINNOW 2.0
Minnow 2.0 logger includes two buttons:
START button:
When configured for "Button Press" logger start, this
button starts and stops logging. In other
configurations, this button is inactive.
DISPLAY button:
This button allows the user to cycle through all LCD
views.
Figure 3: Buttons, LEDs and LCD
Minnow 2.0 includes two LEDs:
Status LED:
When the logger starts logging then this LED pulses
green
once for 1 second.
When logging this LED flashes
green
for 7
milliseconds and off for 6 seconds.
When the logger stops then this LED pulses
red
for
1 second then off.
If the logger becomes full this LED flashes
red
for 7
milliseconds and off for 6 seconds.
Alarm LED:
When a temperature and/or humidity alarm is
triggered this LED flashes
red
for 7 milliseconds and
off for 6 seconds.
A number of display screens can be stepped through by
pressing the "display" button.
The current screen shows current temperature and
humidity.
A further screen shows the maximum readings during a
logging period.
The third screen shows the minimum readings during a
logging period.
There is also a screen to show the average temperature
and humidity during logging (from last configuration).
Alarm LED
Status LED
