Minnow 1.0T & Minnow 1.0TH
User Guide
Senonics LLC
www.senonics.com [email protected] [email protected]
Revision 1.0.4
Senonics LLC ©
10/11
4.9.
Text Size
It is possible to change the application text size by
selecting from the Text pulldown on the program header.
The Auto setting selects one of the sizes based on
screen resolution. When the application reopens, text
size is remembered.
Figure 11: Altering Text Size
4.10. Language
The GUI application comes with language translation.
Today one can select between English, German and
Danish from the Language pulldown on the program
header. Future versions will support more languages.
When the application re-opens, language preference is
kept.
Figure 12: Language Preference
5.
BATTERY REPLACEMENT
The Minnow 1.0 logger runs from a standard coin cell
battery. We recommend a CR2450 620mAH coin cell
battery. There are different manufacturers but a good
one is Panasonic CR-2450/G1AN. You can find it easily
on the web from different places such as
www.digikey.com, www2.mouser.com and probably in
your local supermarket. The key thing is to choose a
CR2450 battery with high capacity since this will
translate into a longer logger battery life.
First remove the Minnow cover by unscrewing the two
fastener screws (#1 Philips) at the rear of the logger.
Then remove the circuit board from the box (use soft
tool or fingernail to remove).
Insert a new battery as shown being careful not to touch
and exposed electronics in the process.
Finally re-attach the cover and tighten the fastener
screws again (be careful not to over tighten).
Figure 13: Minnow 1.0 Battery Replacement
Distributed by MicroDAQ.com, Ltd. www.MicroDAQ.com (603) 746-5524
