Bluefin Logger
User Guide
Revision 1.0.2
Senonics LLC
©
Page 20 of 38
6.11.
Configuration of a Bluefin Logger (Start using Button Press)
You can also configure the device so that it starts logging on a button press. Configure as per section 6.5
but select Button Press.
Remember to write the setup to the logger by pressing the Configure Button.
When you have disconnected the logger you can start logging by a simple button press. You will then see
it is logging because the green light starts flashing every 6 seconds. You can also stop it using a button
press – and all lights will stop flashing.
Figure 18: Configuration Step (Start using Button Press)
Shop for Data Logging products online at:
www.
DataLoggerStore
.ca
1.877.766.5412