EN
FR
IT
N
L
PT
R
U
ZH
ES
D
E
Using the XS WIRELESS systems
XS WIRELESS
| 9
Using t he XS WIRELESS systems
Swit ching t he receiver on/ off
To switch the receiver
on
:
E
Press the standby button
1
. The receiver switches on, the display panel is backlit.
E
Check the RF signal level “
RF
”
H
on the receiver’s display panel.
– The RF signal level is not displayed: The receiver frequency is unused. You can put
your transmitter into operation.
– The RF signal level is displayed: The receiver frequency is already used. Read the
chapter “ Selecting and changing a receiver channel” .
To switch the receiver to
standby
mode:
E
Keep the standby button
1
pressed until “ OFF” appears on the display panel.
To completely switch the receiver
off
:
E
Disconnect the receiver from the mains by unplugging the mains unit from the wall
socket.
Swit ching t he t ransmitt ers on/ off
To switch the transmitters on:
E
Press the ON/ OFF button . The powerLED lights up red. The display panel of the
receiver and the transmitters displays the charge status of the batteries:
To switch the transmitters off:
E
Keep the ON/ OFF button pressed until “ OFF” appears on the display panel.
Display on the receiver Display on the transmitter
Charge status
approx. 100 %
approx. 70 %
approx. 30 %
The display and the power
LED are flashing.
The charge status is critical.
OFF
615.
375
