Sennheiser SR 2020-D -, Инструкция по эксплуатации, Страница: 18 / 25

SR 2020-D | 17
Operating the SR 2020-D
Selecting the input signal (“Input”)
You can connect either a condenser microphone or any other audio source (e.g. CD and MP3
player, see page 5) to the transmitter.
To select the input signal:
Select the „ Input “ menu.
Press the SET button 5 to display the current setting („ Mic “/„ Line “).
Use the
▲
/
▼
rocker button 4 to select the desired input signal:
You connect ... Select
a condenser microphone? „ Mic “
an external audio source? „ Line “
Press the SET button 5 to store the selected input signal.
Adjusting the sensitivity of the Mic/Line input (“Sensitiv”)
If you connect a microphone to the transmitter, the microphone signal has to be amplified
by the transmitter. Other audio sources can be amplified, if their audio signal is too low (see
page 17).
To adjust the input sensitivity:
Select the „ Sensitiv “ menu.
Use the
▲
/
▼
rocker button 4 to change the setting. The Mic/Line level display
2
should
show full deflection during the loudest passages.
Press the
SET button SET 5 to store the input sensitivity of the Mic / Line input.
Displaying the phantom power (“Phantom”)
When you activate the transmitter’s microphone input, the phantom power is automatically
available (see page 17). The display show the value of the phantom power.
Adjusting the contrast of the display (“Contrast”)
To adjust the contrast of the display to the ambient light:
Select the „ Contrast “ menu.
„ Contrast “ appears on the display and the current setting is shown.
Use the
▲
/
▼
rocker button 4 to change the setting.
Press the SET button 5 to store the setting.