Sennheiser SKM 300 G3, Инструкция по эксплуатации

Страница: 31 / 39

30 | SKM 300 G3
Cleaning and maintaining the radio microphone
Cleaning and maintaining the
radio microphone
Use a cloth to clean the radio microphone from time
to time.
Do not use any solvents or cleansing agents.
To clean the sound inlet basket of the microphone head
(MMD 835-1, MMD 845-1, MME 865-1):
Unscrew the upper sound inlet basket from the
microphone head by turning it counterclockwise (see
diagram).
Remove the foam insert.
To clean the sound inlet basket:
– Use a cloth to clean the upper sound inlet basket
from the inside and outside
– or scrub with a brush and rinse with clear water.
If necessary, clean the foam insert with a mild
detergent or replace the foam insert.
Dry the upper sound inlet basket.
Dry the foam insert.
Reinsert the foam insert.
Replace the sound inlet basket on the microphone
head and screw it tight.
You should also clean the contact rings of the
microphone head from time to time:
Wipe the contact rings of the microphone head with
a cloth.
CAUTION
Liquids can damage the electronics of the radio
microphone!
Liquids entering the housing of the product can cause a
short-circuit and damage the electronics.
Keep all liquids away from the radio microphone.
CAUTION
Liquids will damage the microphone head!
Liquids will damage the microphone head.
Only clean the upper sound inlet basket.