Sennheiser SKM 2000, Инструкция по эксплуатации

Страница: 25 / 39

24
Adjusting settings via the operating menu
The extended menu “ Advanced Menu “
Setting the transmission frequencies and the frequency banks
“U1” to “U6” – “Tune”
Via the “ Tune ” menu item, you can:
1. set a transmission frequency to be stored in the current channel of the
frequency bank (“ U1 ” to “ U6 ”)
2. or select a frequency bank (“ U1 ” to “ U6 ”) and a channel and assign this
channel a transmission frequency.
Setting a transmission frequency for the current channel
Set the desired frequency.
When you have selected one of the system banks and then select
the “
Tune ” menu, the radio microphone automatically switches to
channel 1 of the frequency bank “ U1 ”. In this case, “ U1.1 ” briefly
appears on the display panel.
Upon delivery, the channels of the frequency banks “ U1 ” to “ U6 ”
are not assigned a transmission frequency.
When you are in the “ Tune ” menu item, the RF signal is
deactivated.
It is vital to observe the notes on frequency selection on page 27.
Move the multi-function switch until the “ Tune ” menu item
appears.
Press the multi-function switch.
The frequency selection appears.
Press the multi-function switch.
Your settings are stored.
You are back to the operating menu.
Tu n e
B.Ch: U1 . 1
B.Ch: U1. 1
Tu n e Advanced Menu
Tune
“Stored”
543.200 MHz
543.200 MHz 543.200 MHz
Select the frequency
bank and confirm
Select the channel;
store the setting
Call up “Tune”
(special function)