Sennheiser SK 5212-II - ANNEXE 762, Инструкция по эксплуатации

Страница: 25 / 35

Adjustment tips for the operating menu
24
Adjusting the bass roll-off frequency – “ LOWCUT ”
To reduce unwanted low-frequency noise such as wind and handling noise, you can activate a
low-cut filter. The low-cut frequency is 120 Hz.
If you do not want to reduce low-frequency signal portions, select the setting “ FLAT ”.
Selecting the standard display – “ VIEW ”
Via the “ VIEW ” menu, you can select one of the following standard displays:
The selected standard display is shown
• after switch-on,
• after the menu settings have been displayed for 10 seconds in display mode.
Loading the factory-preset default settings – “ RESET ”
Via the “ RESET ” menu, you can load the factory-preset default settings. After the reset, the
standard display is shown on the LC display panel.
Transmission
frequency “
FREQ ”
Channel
“
CHAN ”
Name
“
NAME ”
Function Setting
Low-cut frequency “ FLAT ”
Microphone sensitivity “ 0 dB ”
Name “ SK5212 ”
Standard display Transmission frequency
Autolock function deactivated
Channel “ FIX 01 ”
Output power “ PWR.HI ”
Frequencies in the frequency bank “ VAR ” are reset.
RF
MHz
CH
CH
RF RF