![background image](http://html.mh-extra.com/html/sennheiser/sk-500-g3/sk-500-g3_instruction-manual_1240136025.webp)
24
Adjusting settings via the operating menu
The extended menu “
Advanced Menu
”
Setting transmission frequencies and frequency banks –
“Tune”
Via the “
Tune
” menu item, you can set a transmission
frequency to be stored in the current channel
or
you can
select a different channel in one of the frequency banks
“
U1
” to “
U6
” and assign this channel a transmission
frequency.
Setting a transmission frequency for the current channel
왘
Set the desired frequency.
Selecting a frequency bank and a channel and assigning
this channel a frequency
When you have selected one of the system banks
and then select the “
Tune
” menu, the bodypack
transmitter automatically switches to channel 1 of
the frequency bank “
U1
”. In this case, “
U1.1
” briefly
appears on the display panel.
Upon delivery, the channels of the frequency banks
“
U1
” to “
U6
” are not assigned a transmission
frequency.
When you are in the “
Tune
” menu item, the RF
signal is deactivated.
It is vital to observe the notes on frequency
selection on page 28.
왘
Press the rocker button until the “
Tune
” menu
item appears.
왘
Press the
SET
button.
The frequency selection appears.
왘
Press the
SET
button.
Your settings are stored.
You are back to the operating menu.
왘
Press the rocker button until the “
Tune
” menu
item appears.
왘
Keep the
SET
button pressed until the frequency
bank selection appears.
Select the MHz
value and confirm
Select the kHz
value; store the
setting
542
.625 MHz
Tune
544.
625
MHz
B.Ch: U1. 1
B.Ch: U1. 1
Tune
Call up “Tune”
Advanced Menu
Tune
“Stored”
542.625 MHz
SET
SET
SET
Содержание SK 500 G3
Страница 1: ...SK 500 Instruction manual ...