Switch on by pressing the ON/Off switch(
6
).
The display will light (
D1
) to show the frequency in use. MUTE will also be lit.
If a transmitter is operating on this frequency there will be a delay of 4 seconds
before the display will change (
D2
) to show RF level, deviation and receiving aerial in
use (A or B).
D1
D2
Press the SET button (
5
). The text “FREQUENCY MHZ” will flash (
D3
).
Using
4
), select a different frequency.
Press SET (
5
) for > 3 seconds to store the change. Confirmation of the change is
given by “FREQUENCY MHZ” ceasing to flash and “Sto” appearing when the rest of
the display goes off briefly.
Pressing SET briefly will cancel at any time during this operation.
D3
Содержание Sennheiser 3000 series
Страница 1: ...The Gradav Guide to Sennheiser 3000 series Radio Mics ...
Страница 2: ......
Страница 15: ......
