Sennheiser S1 PASSIVE, Инструкция по эксплуатации

Страница: 19 / 24

If a problem occurs ...
18 | S1 PASSIVE
Replacing the ear pads
1 Grasp the edge of the ear pad and peel it up and away from the ear cup.
2 Slide the new ear pad onto the ear cup.
Replacing the wind screen
1 Pull the wind screen from the microphone.
2 Carefully slide the new wind screen over the microphone.
If a problem occurs ...
Problem Possible cause Solution Page
Power LED
9
does not light up
on switch-on
The batteries/
rechargeable batteries
are flat. Charge the rechargeable
batteries or replace the
batteries. 7
Audio signal in
one ear only You are receiving a
mono source but the
headset is set to stereo
operation. Set the headset to mono
operation. 14
The volume control
0
is misadjusted.
Check the volume
control
0
.
13
1 2
1 2