8
If a problem occurs...
Problem
Possible cause
Solution
Microphone
does not work
No supply
voltage available.
Check the power supply
unit/the corresponding
software settings.
Microphone is
not connected to
an AES 42 input.
Check if the used
input complies with the
AES 42 standard.
Channel is muted. Deactivate “Mute” in the
AES 42 remote control.
Audio signal
is distorted
Excessive sound
pressure of the
audio signal to
be recorded.
Increase the pick-up
distance or activate the
pre-attenuation in the
AES 42 remote control.
Overload due to
low-frequency
interference.
Use a suitable windshield
(accessory).
Activate the pre-
attenuation in the AES 42
remote control.
No
synchonization
between
MZD 8000
and
receiver
or no
digital
audio
signal
Connected cable
is incorrect.
Check the cable.
Connected cable
is too long.
Use an AES/EBU cable.
Use a shorter cable.
Reduce the sampling rate.
Cable path with
too many con-
nectors.
Use a continuous cable.
MZD 8000_US.fm Seite 8 Freitag, 31. Oktober 2008 11:16 11
