Sennheiser IS 410, Инструкция по эксплуатации

Страница: 14 / 24

9
Using the system components
Switching the transmitter on
왘
Take the stethoset receiver out of the transmitter’s charging
compartment
. The transmitter automatically switches on.
The LED lights up green.
Note:
If the receiver is placed into the transmitter’s charging
compartment
, the transmitter automatically switches off.
The LED goes off.
Switching the stehoset receiver on
The stethoset receiver automatically switches on when you pull
the earbows apart and put the receiver on. When you take the
receiver off, it automatically switches off.
왘
Before putting the receiver on, use the volume control to
adjust the volume to a low level. This protects your hearing
from damage.
왘
Put the receiver on the correct way round, with the
Sennheiser logo at the front.
Volume up? - No!
When people use headphones, they tend to
choose a higher volume than with loudspeakers.
Listening at high volume levels for long periods
can lead to permanent hearing defects. Please
protect your hearing, Sennheiser headphones also
sound exceptionally good at low volumes.
Attention!
ON
OFF