Cat. No. 005336
HS 2
Microphones |
Back-Electret Condenser Microphone
General Description
The HS 2 is an omni-directional headset microphone using an MKE 2 Gold
capsule and fitted with a steel wire cable and a special 3-pin connector
for Sennheiser 3000 and 5000 Series bodypack transmitters. The small
capsule and gooseneck assembly can be optimally positioned for both
vocal and speech applications. Also available as HS 2-1 in beige.
Features
j
Frequency response optimised fpr close talking applications
j
Lightweight design
j
Flexible gooseneck for optimally positioning the microphone capsule
j
Umbrella Diaphragm™ protects the mic against sweat
Technical Data
Pick-up pattern ....................................................... omni-directional
Frequency response .................................... 20 – 20,000 Hz ± 3 dB
Sensitivity
(free field, no load) (1 kHz) .................................. 5 mV/Pa ± 3 dB
Nominal impedance .................................................................... 1 k
Ω
Min. terminating impedance ..................................................4.7 k
Ω
Equivalent noise level
A-weighted (DIN IEC 651)........................................................ 26 dB
CCIR-weighted (CCIR 468-3).................................................... 39 dB
Max. SPL (1 kHz)...............................................142 dB (THD = 1 %)
Power supply .................................................................. 18 k
Ω
/7.5 V
Connector .................................................3-pin audio connector for
SK 50/SK 250/SK 5012
Cable length.................................................................................1.6 m
Capsule diameter ................................................................ Ø 4.8 mm
Weight ............................................................................. approx. 34 g
Product Variants
j
HS 2-1: as HS 2, but beige
j
HS 2-5: as HS 2, but with open-ended cable
