8
LED indications
Meanings of the LED
:
Putting the headset into operation
Inserting the batteries
Insert the batteries into the battery compartments on the
left and right ear cups as follows:
왘
Open the battery compartment
by pushing the catch
and open the cover.
왘
Insert the AAA size battery as shown.
왘
Close the battery compartment
. The battery compart-
ment cover locks into place with an audible click.
Connecting the headset
The headset’s operating control features two cables with
one jack plug each.
왘
Connect the headset to the corresponding sockets of your
intercom.
LED
Meaning
red
NoiseGard is switched on
green
TalkThrough is switched on
flashing
Batteries are almost flat
Connector
for connection to the
¼” (6.35 mm) jack plug
headphone output
5.25 mm jack plug
microphone input
