8
Replacing the connecting cable
Replace the connecting cable if it is damaged. To do so, please
proceed as follows:
왘
Remove the ear cushion. Grasp behind the ear cushion and
pull it up and away from the earcup.
왘
Loosen the screw
���
and remove it.
왘
Remove the cover from the earcup
���
.
왘
Pull the connector
���
out of the socket.
왘
Remove the antikink protection of the connecting cable
from the holding device
���
.
왘
Insert the antikink protection of the new connecting cable
into the holding device.
왘
Plug the connector
���
of the new connecting cable into the
socket as shown in the diagram on the left.
왘
Put the cover back onto the earcup
���
.
왘
Replace the screw
���
and tighten it.
왘
Slide the ear cushion onto the earcup.
Converting the headphones into a headset
If you wish to convert your headphones into a headset, please
contact your Sennheiser service partner who will equip the
headphones with a microphone.
���
���
���
���
