Using the headphones
12 | HD 250BT
Pairing the headphones with a Bluetooth
device
1. Switch the headphones on (> 14) and place them close to the
Bluetooth device (max. 20 cm).
2. Press and hold the on/off button for 4 seconds until you hear the
voice prompt “Pairing”.
The LED flashes red and blue. The headphones are in pairing
mode.
3. Activate Bluetooth on your Bluetooth device.
4. Via the menu of your Bluetooth device, start the search for new
Bluetooth devices.
All active Bluetooth devices in the proximity of your Bluetooth
device are displayed.
5. From the list of found Bluetooth devices, select “HD 250BT”. If
necessary, enter the default pin code “0000”.
6. During pairing you hear the voice prompt “Pairing”. If pairing was
successful, you hear the voice prompt “Connected”. The LED
flashes blue 3x.
If no connection is established within 5 minutes, pairing mode
is terminated and the headphones switch to standby mode. If
necessary, repeat the steps described above.
If you switch on the headphones for the first time (the pairing
list is empty), they automatically switch to pairing mode.
1
3
5
4
2
HD 250BT
Keyword: 0000
“Connected“
Menu
Add Device
20 cm
Menu
Bluetooth on
Bluetooth off
ON
ON
“Pairing“
Right
R
4s
Hold
