Sennheiser EM 3731-II - ANNEXE 583, Инструкция по эксплуатации

Страница: 13 / 50

Product overview
12
Command display (status display of the audio outputs AF and
Command)
The command display is only available with the EM 3732-II COM twin
receiver.
Besides the two audio outputs
K
and
M
the EM 3732-II COM twin receiver
also features the two command outputs
J
and
L
.
Via the “ Command ” menu, you can configure the receiver so that – with
the command button of the transmitter pressed – the audio signal is
available at only one of the outputs or at both (see “Configuring the audio
outputs of the EM 3732-II COM” on page 34).
The command display
쐎
shows the audio output at which the
transmitter’s audio signal is available.
When “ AF ” lights up brightly, the audio signal is available at the audio
output
K
and/or
M
.
When “ AF ” does not appear, the audio signal is not issued on the audio
output
K
and/or
M
.
When “ COM ” lights up brightly, the audio signal is available at the
command output
J
and/or
L
.
When “ COM ” does not appear, the audio signal is not issued on the
command output
J
and/or
L
.
LEDs for booster supply of antenna inputs
The LEDs for booster supply of antenna input A
N
and/or B
S
light up
when:
• the booster supply voltage is applied to the corresponding antenna
input A
O
and/or B
R
.
The LEDs for booster supply of antenna input A
N
and/or B
S
go off
when:
• the booster supply voltage for the corresponding antenna input A
O
and/or B
R
is switched off or
• the booster supply voltage is short-circuited or overloaded.
COM
AF
J K L M
AF
COM
N O P Q R S