Installing the SR IEM G4
24
Daisy chaining audio signals
Using the
LOOP OUT BAL L
and/or
LOOP OUT BAL R
output sockets, it is
possible to transmit a signal that you want to make available to all receiv-
ers from the mixing console to a transmitter and then to daisy chain this
signal from the transmitter to the other transmitters.
In this way, for example, you can distribute an AUX path from the mixing
console in Focus mode to multiple transmitters and output a separate sig-
nal on the other channel of the same transmitter (e.g. for the individual mu-
sician).
▷
Transmit a signal from the mixing console to the input socket of trans-
mitter
A
(in this example:
BAL AF IN R
).
▷
Connect the
LOOP OUT BAL R
output socket of transmitter
A
with the
BAL AF IN R
input socket of transmitter
B
.
▷
Now connect the
LOOP OUT BAL R
output socket of transmitter B with
the
BAL AF IN R
input socket of transmitter
C
.
▷
Continue on in this way for the remaining transmitters.
Содержание EK IEM G4
Страница 17: ...Installing the EK IEM G4 16 Battery status Charge status of the batteries Charge status is critical LOW BATT ...
Страница 52: ...Using the EK IEM G4 51 Menu structure The figure shows the complete EK IEM G4 menu structure in an overview ...
Страница 102: ...Specifications 101 Specifications You can find the product specific technical data in the sections below ...
Страница 108: ...107 Block diagram AC 41 ...
